Stand back . . . hold your chin with your right or left hand .
. .
Ponder . . .
Use right and left side of your brain . . .
Then . . .
Giggle and finish it.
Or . . .
Smile and get someone else to finish it for you!
Assembly & Instalation
Instructions using Manorstone®
Average setup time:
Tools required:
One person, two hours
Twelve people, one weekend, food, and fun.
Shovel, rake, chisel, 4’ level, eye protection (wear eye protection
at all times)
Length=16”
Depth=12”
Height=6”
2’ model – 28 blocks
Lip Removal
Manorstone®
comes with a one-inch lip on the bottom to allow the block to tier as it
stacks. For our purposes we must remover this lip. Full blocks
can be stacked around unit.With a hammer and chisel (wear eye protection)
just tap at the tip of it and it will easily fall off.
Splitting
blocks (optional)
To
achieve an appealing look when laying stone, it is necessary to stagger
your material. In this application, you will need to split some of
your ManorstoneÒ. Draw a line all the way around the block.
Set the block on a hard surface. With a hammer and chisel, firmly
tap along the line just hard enough to score the concrete. Repeat
until the block separates. Clean edges with a chisel.
To
achieve an appealing look when laying stone, it is necessary to stagger
your material. In this application, you will need to split some of
your ManorstoneÒ. Draw a line all the way around the block.
Set the block on a hard surface. With a hammer and chisel, firmly
tap along the line just hard enough to score the concrete. Repeat
until the block separates. Clean edges with a chisel.